|
|
Post by bigscreen on Mar 3, 2009 13:53:38 GMT -5
what type fuel filter do you need to run e85?
|
|
|
|
Post by motioncam on Mar 3, 2009 14:00:49 GMT -5
|
|
|
|
Post by Heath Daniel on Mar 3, 2009 15:27:34 GMT -5
Welcome to the board bigscreen. The filter motioncam pointed out is the one I recommend too, thanks.
|
|
|
|
Post by adamsvega on Mar 3, 2009 19:21:04 GMT -5
 a alky safe s/s screen type is what i use this and rons are my choice $$$$ being tight the aeromotive and bg stuff is too much |
|
|
|
Post by Shannon Clark on Mar 6, 2009 9:23:48 GMT -5
Here is the filter I run. No problems as of yet. I run a filter before the pump and one after it. HaHa same filter different name!!  |
|
|
|
Post by David7355 on Mar 6, 2009 10:14:29 GMT -5
Here is the filter I run. No problems as of yet. I run a filter before the pump and one after it. HaHa same filter different name!! Running exact same filter. So far, so good.  Could be wrong, but I'm guessing the Jeg's filter and the Summit filter are exactly the same. |
|
|
|
Post by Shannon Clark on Mar 6, 2009 12:29:52 GMT -5
I am sure they are sourced from the same place. When I talked to summit they said it was NOT alcohol compatable.?? The A1000 I am running also wasn't recommended to be used with alcohol. I want to a PRI show and talked to a few reps at the Aeromotive booth to see if they had any complaints about people running their pump with E85 as the fuel. They said NONE at all. Guess it must be the gasoline chaser!
|
|
|
|
Post by adamsvega on Mar 7, 2009 16:44:17 GMT -5
you have to watch the s/s is a different element and oring than the gas /paper type with the same housing and it is listed as gas and alky safe!
|
|
