|
|
Post by David7355 on Feb 13, 2009 10:07:51 GMT -5
When the time comes, where is a person gonna get replacement gaskets for the QFT Metering blocks?? Are they easy to find, or do you have to get them from QF, or what?  I noticed I've already got a small tear in the corner of one of mine.  |
|
|
|
Post by Heath Daniel on Feb 13, 2009 11:11:55 GMT -5
David I can send you some or your local speed parts shop should be able to get them for you. I believe they are the same as a regular non-stick gasket with the exception of the cross channel through hole being slightly bigger which you can open up with a hole punch. If you have some regular gaskets already just lay one on top and compare them. The blue QF gaskets do have a tendency to stick so what we do is take the bolts out and soak the metering block/main body mating area with WD-40 then pry it out slightly and soak it some more. After it sits for a few minutes it will virtually fall apart and the WD doesn't hurt the gaskets sealing ability and next time it will come apart easier.
|
|
