|
|
Post by joeq66 on Jun 5, 2014 19:47:34 GMT -5
im getting ready to buy some 10an lines and need to know what brand or kind you guys are using.Im not sure about the rubber lined stuff so if you have a preference on brands and or kind please post them..Im wanting some kind of braided
|
|
|
|
Post by s10360 on Jun 6, 2014 20:27:59 GMT -5
im getting ready to buy some 10an lines and need to know what brand or kind you guys are using.Im not sure about the rubber lined stuff so if you have a preference on brands and or kind please post them..Im wanting some kind of braided I run -8 lines made by Earls! Stainless steel braided. |
|
|
|
Post by joeq66 on Jun 7, 2014 9:32:35 GMT -5
thanks so much for the reply.I talked to some guys on the yellow bullet site and they all suggested something with Teflon instead of rubber.Im just about to place my order for some so hopefully no problems.I really appreciate your reply to my question...thanks again
|
|
|
|
Post by jparker1229 on Jun 7, 2014 9:50:11 GMT -5
I run 10 al to regulator 8 al to carb 8al return I have product engineering fuel pump 310 gpm
|
|
|
|
Post by jparker1229 on Jun 7, 2014 9:52:30 GMT -5
|
|
|
|
Post by adamsvega on Jun 16, 2014 17:40:02 GMT -5
GET THE TEFLON STUFF AT A HOSE SHOP AND HAVE THEM CRIMP UP THE FITTINGS TO THE MAIN LINES .
THEN USE A GOOD BRAND RUBBER HOSE FROM GATES FOR THE REST LONG HORN OR FUEL MASTER XTREME ARE THE TOUGHEST STUFF
THERE IS A PUSHLOC TYPE HOSE FROM THEM THAT IS ETHANOL FRIENDLY TO BUT IT FOR CHEM/AGRI. USE DONT KNOW IF ITS HEAT RATED .
|
|
