john
Junior Member
Posts: 70
|
Post by john on Mar 18, 2009 10:07:28 GMT -5
how is the e85 on the fuel cell foam or do you not recomend using foam with e85?
|
|
|
|
Post by Heath Daniel on Mar 18, 2009 13:14:56 GMT -5
Over the four years we have been running E85 we haven't seen any effect on the foam in the fuel cell.
|
|
john
Junior Member
Posts: 70
|
Post by john on Mar 18, 2009 13:27:45 GMT -5
Thanks heath, hey how long from time I ask you to order till time to get the parts. I am in no hurry just trying to figure out my race schedule and when I might want to do the swap.
|
|
|
|
Post by Heath Daniel on Mar 18, 2009 15:29:21 GMT -5
What will you be ordering?
|
|
john
Junior Member
Posts: 70
|
Post by john on Mar 18, 2009 17:25:22 GMT -5
4150hp e85 conversion kit from you I just need to get you my jet sizes and air bleed sizes
|
|
|
|
Post by Heath Daniel on Mar 18, 2009 21:32:42 GMT -5
You should have your kit in about a week depending on where you live after placing your order. I don't necessarily need you air bleed and jet sizes, just the cfm and type of your carb and what cc your accelerator pumps are.
|
|
john
Junior Member
Posts: 70
|
Post by john on Mar 19, 2009 9:50:58 GMT -5
Thanks heath, 1050hp holley 30cc pumps location reno I will let you know when I am ready I will get your number from Gary or Ken if that is ok with you.
|
|
|
|
Post by Heath Daniel on Mar 19, 2009 11:04:31 GMT -5
No problem John. My number is 704-246-6500. Gary and Ken have been wonderful to work with. Just let me know when your ready to squeeze corn man.  |
|
john
Junior Member
Posts: 70
|
Post by john on Mar 19, 2009 11:29:49 GMT -5
I'll get my list number on the carb and info and give you a call you are three hours ahead right? I do not want to call you to late.
|
|
|
|
Post by xsivpwr on Mar 19, 2009 12:18:59 GMT -5
It's never to late he never sleeps LOL
|
|
john
Junior Member
Posts: 70
|
Post by john on Mar 19, 2009 12:41:51 GMT -5
I am going to make the switch and come out and test on the 4th I just got to see how fast I can get the kit.
How about ignition timing less more the same?
|
|
|
|
Post by xsivpwr on Mar 19, 2009 12:52:02 GMT -5
Start out the same. But Heath has found now that on some cars he has worked with liked less.
|
|
|
|
Post by Heath Daniel on Mar 19, 2009 14:22:11 GMT -5
John, call whenever man. We'll get you fixed up.
|
|
john
Junior Member
Posts: 70
|
Post by john on Mar 19, 2009 14:38:03 GMT -5
Called left you a message
|
|
